Note /
API gravity vs. the API inventory report: what's the difference

If you're new to a crude desk, the first time someone says "the API report just came out" and then five minutes later quotes "38 degrees API" on a cargo, it's fair to wonder if you misheard something. You didn't. Those are two completely different things that happen to share three letters.
Two API's, one acronym
The American Petroleum Institute is a trade association. It publishes its own weekly statistical bulletin on crude and product stocks, usually out Tuesday afternoon, built from member company survey data. The U.S. Energy Information Administration publishes the Weekly Petroleum Status Report the next morning, Wednesday, using mandatory EIA-814 and related survey forms. Traders watch both. The API number is directionally useful and moves markets on a quiet Tuesday, but it's the EIA print that settles positions, because it's the one with statistical authority behind it and the one most benchmarks reference.
API gravity has nothing to do with either report. It's a measure of how light or heavy a crude oil is, expressed in degrees, developed by the American Petroleum Institute decades ago as a convenient alternative to specific gravity. The formula is:
°API = (141.5 / specific gravity at 60°F) − 131.5
Water sits at 10° API by definition. Anything above that floats; most crude oils run somewhere between 10° and 45°, and the number shows up on every assay sheet, every cargo nomination, every refinery feedstock spec you'll ever read.
Light, heavy, sweet, sour, and why refiners care
Gravity tells you one thing: density, and roughly how much of the barrel comes off as lighter, higher-value distillates versus heavier residue. Crude above about 31° API is generally called light, below about 22° is heavy, and everything in between is medium. WTI runs around 39-40° API. A heavy Canadian or Venezuelan grade can sit in the teens.
Sulfur content is a separate axis entirely, and this is where a lot of confusion creeps in for people coming from outside the physical market. Sweet means low sulfur, typically under 0.5%. Sour means high sulfur. The two scales are independent: you can have light sweet crude (WTI, Brent), light sour crude, heavy sweet crude, or heavy sour crude (Mars, Maya, most Canadian heavy grades). A refinery configured for light sweet feedstock can't just swap in heavy sour without giving up yield or running into corrosion and desulfurization limits, which is exactly why the light sweet versus heavy sour spread moves independently of the headline crude price and why refiners pay close attention to which grade is sitting in the tank, not just the barrel count.
Why this matters when you're reading a stocks number
Neither the API's Tuesday number nor the EIA's Wednesday report tells you much about grade mix at the tank level. They give you aggregate commercial crude stocks, PADD-level detail at best, and by the time either number prints, the physical barrels have usually already moved. A terminal operator's self-reported inventory data lags further still, and it says nothing about what's actually sitting on a given tank farm between release days.
That gap, between what the weekly reports tell you and what's physically in the tanks right now, is the reason a desk builds its own read from observable data rather than waiting on Tuesday or Wednesday. Oil Inventory Index tracks that gap directly, measuring the shadow cast by floating roof tanks across covered facilities from daily satellite passes and turning it into a daily CSV series per region or facility, so you have a stocks signal that doesn't sit idle between agency prints.
If you're tired of guessing what happened to inventory levels between Tuesday's API number and Wednesday's EIA release, it might be worth seeing what a daily read looks like for your coverage area.